System Connection; Connection Of The System Accessories - Kenwood HM-582MD Instruction Manual

System connection

1. Connection of the System Accessories

Connect the antenna as shown in the figure.
Do not plug the power cord into a wall AC outlet until
the connection has been completed.
Connection of the Accessory Antenna
AM loop antenna
The supplied antenna is for indoor use. Place it as far as
possible from the main system, TV set, speaker cords and
power cord, and set it to a direction which provides the best
reception.
1
2
AM
GND
FM
75
ANTENNA
In case of bad reception
FM outdoor antenna
Lead the 75 coaxial cable connected to the FM outdoor antenna into the room and connect it to the FM 75 terminal.
Please remove the indoor antenna after an outdoor antenna has been installed.
AM
GND
FM
75
ANTENNA
3
AM
GND
FM
75
ANTENNA
(Commercially available)
AM
(Commercially
available)
GND
FM
75
ANTENNA
Malfunction of microcomputer
If operation is not possible or errone-
ous display appears even though all
connections have been made prop-
erly, reset the microcomputer refer-
ring to "In case of difficulty".
FM indoor antenna
The accessory antenna is for temporary indoor use only. For
stable signal reception we recommend using an outdoor
antenna. Remove the indoor antenna if you connect one
outdoors.
1 Plug into the terminal.
2 Locate the position providing good re-
ception condition.
3 Fix the antenna.
Assembling the antenna
FM outdoor antenna
(Commercially available)
75 coaxial cable
(Commercially available)
Contents
System connection
l
AM loop antenna
FM indoor antenna
7