Balance Adjustment - Kenwood HM-582MD Instruction Manual

Kenwood stereo system user manual

Hide thumbs Also See for HM-582MD:

Service manual (37 pages)

Table Of Contents

Table of Contents

Muting the sound temporarily (MUTE)

Remote control unit only

Blinks

MUTE

÷ Press again to resume the original volume.

÷ This is also cancelled when the volume is adjusted.

Listening through headphones

1 Insert the headphone plug into the phones jack.

÷ Headphones with a stereo mini plug can be connected.

÷ The sounds from all speakers are cut off.

2 Adjust the volume with the volume/multi-control

knob.

Tone adjustment (Remote control unit only)

The responses of the lowest frequencies (BASS) and

highest frequencies (TREBLE) can be adjusted as de-

sired.

After this adjustment, the N.B. effect will be disabled.

1 Press the TONE key to select "BASS".

Adjust the level of lowest frequencies as desired

using the VOLUME keys.

ONE

ONTROL

0BASS

TONE

2 Press the TONE key again while "BASS" is dis-

played to select "TREBLE". Adjust the level of

the highest frequencies using the VOLUME keys.

ONE

ONTROL

0TREBLE0+4

TONE

3 Press the TONE key once more.

÷ The BASS and TREBLE can be adjusted independ-

ently in the range from –4 to +4.

TONE

A.P.S.

MUTE

12:30PM

TRACK

VOLUME

Bass and treble compensation

(N.B.: Natural Bass circuit)

S.DIRECT

SOUND

Each press switch the modes as follows.

"S.DIRECT" ... The source signal from a CD or MD

can be reproduced with high fidel-

ity to the original sound by bypass-

ing the tone control circuitry in the

main unit.

"TONE" ......... The source signal is processed by

the tone control circuitry before be-

ing output from the main unit.

"N.B.1" .......... Only the lowest frequencies are en-

hanced.

"N.B.2" .......... The lowest and highest frequen-

cies are enhanced according to the

current volume level.