Program Timer Playback (Ai Timer Playback And Timer Recording - Kenwood HM-582MD Instruction Manual

Contents
72
Program timer playback (AI timer playback) and timer recording
Two timer programs (PROG.1, PROG.2) are available. Both of them are 24-hour timer programs which can be
executed every day.
Each of timer reservation programs PROG.1 and PROG.2 can store the time zone and contents of timer operation,
which can be executed or deactivated as required.
÷ It is possible to execute both timer reservation programs PROG.1 and PROG.2 simultaneously.
÷ The time zones of PROG.1 and PROG.2 should be set by reserving an interval of 1 minute or more so that they are not overlapped.
Be sure to adjust the clock before setting the timer.
1
Select the source to be played (recorded) and adjust its playback volume.
÷ To listen to radio
The station should be preset prior.
§¶•
÷ To listen to MD
Insert a MD
(Program playback is not possible.)
2
Select the timer reservation mode.
1 Press the menu/demo key.
2 Rotate the volume/multi-control knob to
select "TIMER SET ?" , then press the set
key.
3 Rotate the volume/multi-control knob to
select "PROG.1 ?", then press the set key.
volume/
multi-control
÷ To listen to CD
Insert a CD
(Program playback is not possible.)
÷ For recording
Make preparations for recording.
¤‹ Steps 1 to 3
£
\
\
%
÷ Recording or playing the AUX
source component
For timer playback or timer record-
ing of a source component con-
)
nected to the AUX jacks, connect it
properly by referring to "Connec-
tion of Other Accessories ". 9
÷ In case an associated system compo-
nent is connected, also read the instruc-
tion manual of the component.
Example for playing radio broadcast from 10:30am to
11:30am using PROG.1
2 Timer setting selection
T S
IMER ET
3 PROG.1 selection
T S
IMER ET
PROG.1
TONE
PROG
12 30PM
÷ If you make a mistake in the middle, press the menu/demo
key to cancel the operation and restart it from step 2.
÷ When a timer reservation already has been made, the con-
tents will change to the new settings.
Timer operation
?
Blinks
?
Blinks
1