Erasing All Tracks On A Disc (All Erase) - Kenwood HM-582MD Instruction Manual

Erasing all tracks on a disc (ALL ERASE)

During stop, all tracks can be erased. Be careful in using this operation because the tracks cannot be recovered
once the entire minidisc has been erased.
Please execute operation in stopped condition.
1
Select "Q. ERASE ?".
1 Press the TRACK EDIT key
TRACK EDIT
2 Select "Q. ERASE ?"
P.CALL
4
3 Set it.
SET
2
Press the SET key
Press while "ALL ?" is displayed.
SET
3
Execute the track erasure operation.
ENTER
4
Eject the Mini Disc.
Even after completing MD editing, it is still possible
to cancel the settings in the current editing session
and restore the disc to the condition it was loaded
last time.
Note that this is possible provided that the MD is not
ejected yet.
¢
ˆ
Before using the editing function, press the PGM/
CHARAC. key so that "TRACK" lights.
÷ Editing is aborted if no operation has been performed for 8
seconds.
EDIT
0Q.ERASE ?
Q.ERASE
ALL.ERASE?
Display after execution
"EDIT NOW" : Editing
"COMPLETE" : When editing is completed suc-
cessfully
"CAN'T EDIT" : When editing is impossible
A.P.S.
MD
12:30PM
EJECT
TRACK
WRITING
Information is Mini Disc has been
being written. ejected.
While "WRITING" is displayed, do not impact
or move the unit because information about
Note Note
recording and editing is being written to the
Mini Disc.
Contents
MD Edit Functions
MD
NO DISC
TONE TONE
A P S A P S
59