Program Recording - Kenwood HM-582MD Instruction Manual

Contents
46

Program recording

Desired CD tracks can be programmed in the desired sequence and recorded onto an MD.
Be sure to put the MD recorder in stop mode
1
Make the preparations for recording.
1 Insert a recordable disc into the MD recorder.
2 Insert disc in the CD player.
2
Check the current play mode of the CD player.
If it is in play mode, stop it.
7
3
Program the desired sequence of CD tracks.
Perform steps 2 and 3 of the procedure in "Listen-
ing in the desired sequence (program playback)".
4
Start recording.
MD O.T.E.
5
After recording , eject the MD.
To interrupt a recording
7
(Recording and playback will be stopped.)
(PGM mode+O.T.E.)
STOP
STOP
°
÷ Recording begins from the first track in the program and
completes when the entire program has been recorded.
÷ Recording stops automatically when the program playback of
the CD completes.
While "WRITING" is displayed, do not apply
shock or vibration to the unit because infor-
Note Note
mation is being written on the Mini Disc.
Convenient Recording Methods