Erasing A Single Track During Playback (Erase) - Kenwood HM-582MD Instruction Manual

Contents
58

Erasing a single track during playback (ERASE)

During playback, it is possible to erase only the track being played. The track numbers of the tracks after the
erased track will be adjusted.
Be careful in using this operation because a track cannot be recovered once it has been erased.
Be sure to put the MD recorder in stop or pause mode.
1
Play the track to be erased.
2
Select "ERASE ?".
1 Press the TRACK EDIT key
TRACK EDIT
2 Select "ERASE ?"
4
3 Set it.
3
Execute the track erasure operation.
1 Confirmation of erasing
2 Execute the track erasure operation.
ENTER
4
Eject the Mini Disc.
Even after completing MD editing, it is still possible
to cancel the settings in the current editing session
and restore the disc to the condition it was loaded
last time.
Note that this is possible provided that the MD is not
ejected yet.
P.CALL
¢
SET
SET
Before using the editing function, press the PGM/
CHARAC. key so that "TRACK" lights.
÷ Editing is aborted if no operation has been performed for 8
seconds.
EDIT
oERASE
ERASE
003oKENWOO
Track No. to be erased
ERASEooook?
003oKENWOO
÷ The track being played is erased (together with its track title).
A.P.S.
12:30PM
TRACK
WRITING
Information is
being written.
While "WRITING" is displayed, do not impact
or move the unit because information about
Note Note
recording and editing is being written to the
Mini Disc.
ˆ
MD Edit Functions
?
?
The title is scrolled
if present.
MD MD
EJECT NO DISC
TONE
A P S
Mini Disc has been ejected.
TONE
A P S