Copying Titles In Title Memos For Use As Titles Of Other Mds Or Tracks(Title Copy)(Title Memo) - Kenwood HM-582MD Instruction Manual

Copying titles in title memos for use as titles of other MDs or
tracks
(TITLE COPY) (TITLE MEMO) (Remote control unit only)
To make character entry simpler, disc titles, track titles and/or performer names can be saved in title memos ([1]
to [3]) and copied them with another disc or track. The title memos can save up to three sets of titles and/or input
character sets.
Select the "MD" input.
Copying a disc or track title in a title memo (TITLE COPY)
Example: To save track title "A. Songs" recorded and registered in track NO. 7 of an MD in memory No. [1]
1
Select the save destination title memo number
1 Press the TITLE INPUT key.
TITLE INPUT
2 From the save destination memory numbers
([1] to [3]), select No. [1] and set the selection.
To return
To advance
P.CALL
4 ¢
2
Select the title group([123]) containing the
copy source title.
1 Enter the skip mode.
Aa
If any of or
4 or ¢ key.
2 Select the title group([123]) containing the
copy source title.
PGM
/CHARAC.
AUTO/MONO
£
SET
\
\
12
is displayed, press the
Before using the editing function, press the PGM/
CHARAC. key so that "TRACK" lights.
To abort operation, press the TITLE INPUT key
again.
TITLE
DISC ÷÷÷÷÷÷÷÷÷
TITLE
TONE
INPUT
A P S
Each press of the 4 or ¢ keys switches the operation.
1 DISC •••••••••••••••• (Disc title)
2 001, 002 •••••••••••• (Track title)
3 ALL ERASE ? ••••• (Complete erasure of disc and
4 [1], [2], [3] ••••••••• (Title Memo)
Press the PGM/CHARAC. key for the required number
of times to select one of the character groups below.
• A~Z, space (1 blank character)
• a~z, space
• 0~9, symbols
• Title Memo ([1 2 3]), Title Copy (disc title, track
title)
Contents
MD Edit Functions
track titles)
Continued on next page
65
‰