Kenwood HM-582MD Instruction Manual page 61

2
Input the title.
To select characters with the numeric keys (character input key mode)
Aa 12
If none of or
the numeric keys.
To enter a title
1 Select a character group.
PGM
/CHARAC.
AUTO/MONO
2 Select a character.
1 2 ABC
4 GHI 5 JKL
7 PRS 8 TUV
+100
& ( ) - 0 QZ
When the same key is pressed repeatedly, the charac-
ters will change.
2 ABC
(Example : When
change in the order of A=B=C=a=b=c.)
÷ If you made a mistake, press the CLEAR/DELETE
key.
3 Set the selected character.
SET
4 Repeat steps 1 to 3 above.
To change or clear a title
1 Move the character to the desired character
(to be changed).
1
To return
2 Delete the character.
CLEAR
/DELETE
3 Perform steps 1 to 4 of "To enter a title".
is displayed, press one of
3 DEF
6 MNO
9 WXY
+10' , :
is pressed, the characters will
TUNING
1
To advance
Characters can be selected either in the "character
input key mode" or "skip key mode".
Press the PGM/CHARAC. key for the required number
of times to select one of the character groups below.
Aa
: A~Z, symbols, Title Memo ([1], [2], [3])
12
: 0~9, symbols
Aa
Input place
÷ Use the 1 or ¡ key to move the input position cursor to
the left or right.
÷ To enter a space character, press the TIME/SPACE key.
Aa
B DISC
The cursor moves and stands by for the
next character input.
÷ The character can be set also by pressing another numeric
key, ¡ key or the PGM/CHARAC. key.
÷ If you want to insert a character without deleting any (step
2), place the cursor on the character immediately after the
position you want to insert a character.
Contents
MD Edit Functions
‰
DISC
DISC
Continued on next page
61