Automatic Programmes; Categories; Using Automatic Programmes - Miele DG 7440 Operating And Installation Instructions

Table of Contents

Advertisement

The wide range of automatic
programmes enables you to achieve
excellent results with ease.

Categories

The  automatic programmes are
sorted into categories to provide a
better overview. Simply select the
appropriate programme for the type of
food you are cooking and follow the
instructions in the display.

Using automatic programmes

 Select

Automatic programmes

A list will appear.
 Select the desired food category (e.g.
Fish
).
The automatic programmes available
for the category selected will then
appear.
 Select the desired automatic
programme.
 Follow the instructions on the display.
Tip: Use 
 Info
to display information
such as how to place or turn the food
depending on the cooking programme.
Usage notes
– The degree of cooking is represented
by a bar with seven segments. Using
the navigation area you can set the
desired degree of cooking.
– The weights specified in the
automatic programmes refer to the
weight per piece. For example, you
can cook just one piece of salmon
weighing 250 g or 10 pieces of
salmon, each weighing 250 g, at the
same time.
– The steam oven compartment needs
 .
to cool to room temperature before
starting an automatic programme.
– When you place food into the hot
oven compartment, be careful when
opening the door. Hot steam may
escape. Step back and wait until the
steam has dissipated. Avoid contact
with hot steam, and do not touch the
hot oven compartment walls. Danger
of burning and scalding.
– For some automatic programmes, the
start time can be delayed using
at
– Select the  sensor control to
cancel an automatic programme.
When
Yes
– If by the end of an automatic
programme the food is not cooked
enough for your taste, select
cooking
– Automatic programmes can also be
saved as
select the  sensor control after an
automatic programme has finished.
Automatic programmes
or
.
Finish at
Cancel process?
and confirm with OK.
.
User programmes
Start
appears, select
Cont.
. To do this,
97

Advertisement

Table of Contents
loading

Table of Contents