Miele DG 7440 Operating And Installation Instructions page 118

Installation
Disconnecting from the mains

Risk of electric shock from mains
voltage.
There is a risk of electric shock if the
appliance is reconnected to the
mains supply during repair or service
work.
After disconnection, ensure the
appliance cannot be switched back
on by mistake.
To disconnect the appliance from the
mains power supply, do one of the
following depending on installation:
Safety fuses
 Completely remove the fuse links
from the screw caps.
Automatic circuit breakers
 Press the test button (red) until the
middle button (black) springs out.
Built-in circuit breakers
 For circuit breakers of at least type B
or C, switch the lever from 1 (on) to 0
(off).
Residual current device (RCD)
 Residual current device: switch the
main switch from 1 (on) to 0 (off) or
press the test button.
118