User Programmes - Miele DG 7440 Operating And Installation Instructions

Table of Contents

Advertisement

User programmes

You can create and save up to 20 of
your own programmes.
– You can combine up to 9 cooking
stages to accurately programme your
favourite or most frequently used
recipes. In each cooking stage, you
can select settings such as the
function, temperature and cooking
duration.
– You can enter the name of the
programme for your recipe.
When you call up and start your
programme again, it will run
automatically.
There are different ways of creating a
user programme:
– At the end of an automatic
programme or special application,
save it as a user programme.
– Save a cooking programme after
running it with a set cooking duration.
Then enter a programme name.
98
Creating user programmes
 Select
User programmes
 Select
Create programme
You can now specify the settings for the
first cooking stage.
Follow the instructions in the display:
 Select and confirm the desired
settings.
 Select
Finish cooking stage
All settings for the first cooking stage
have now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
 If additional cooking stages are
required, select
proceed as per the 1st cooking stage.
If you want to check the settings or to
change them at a later date, select the
cooking stage in question.
 When you have finished setting all the
cooking stages, select 
 Enter the programme name.
 Select .
A message will appear in the display
confirming that the programme name
has been saved.
 Confirm with OK.
You can start the saved programme
immediately, delay the start or change
the cooking stages.
 .
.
.
Add cooking stage
.
Save
and

Advertisement

Table of Contents
loading

Table of Contents