Automatic Programmes; Categories; Using Automatic Programmes; Usage Notes - Miele DGC7440X Operating And Installation Instructions

Automatic programmes

The wide range of Automatic
programmes enable you to achieve
excellent results with ease.

Categories

The  Automatic programmes are
sorted into categories to provide a
better overview. Simply select the
appropriate Automatic programme for
the type of food you are cooking and
follow the instructions in the display.

Using Automatic programmes

 Select
Automatic programmes
A list will appear.
 Select the desired food category (e.g.
Cakes ).
The Automatic programmes available
for the food type selected will then
appear.
 Select the Automatic programme that
you want to use.
 Follow the instructions in the display.
Useful tip: Use  Info
information such as how to place or
turn the food depending on the cooking
programme.

Usage notes

– The degree of cooking and browning
are represented by a bar with seven
segments. You can set the desired
degree of cooking or browning using
the navigation area.
– The weights specified in the
Automatic programmes refer to the
weight per piece. For example, you
can cook just one piece of salmon
128
.
to display
weighing 250 g or 10 pieces of
salmon, each weighing 250 g, at the
same time.
– The oven interior needs to be at room
temperature before starting an
Automatic programme.
– When you place food in the hot oven
compartment, be careful when
opening the door. Hot steam may
escape. Step back and wait until the
steam has dissipated. Avoid contact
with hot steam, and do not touch the
hot oven compartment walls. Danger
of burning and scalding.
– Please refer to recipes for information
on suitable baking containers.
– For some Automatic programmes the
start time can be delayed using
at or Finish at . The individual cooking
stages of the Automatic programme
are listed under the
stages menu option.
– If by the end of an Automatic
programme the food is not cooked
enough, select
or Continue baking
– Automatic programmes can also be
saved as User programmes
select the  sensor after an
Automatic programme has finished.
Start
Show cooking
Continue cooking
.
. To do this,