Miele@Home - Miele DG 7440 Operating And Installation Instructions

Settings

Miele@home

The steam oven is a Miele@home-
compatible appliance. Your steam
oven is fitted ex-works with a WiFi
communication module and is suitable
for wireless communication.
There are a number of ways of
connecting your steam oven to your
WiFi network. We recommend
connecting your steam oven to your
WiFi network using the Miele@mobile
App or via WPS.
After installing the Miele@mobile App
on a mobile device, you can do the
following:
– Operate your appliance remotely
– Call up information on the operating
status of your appliance
– Call up information on the
programme sequence of your
appliance
– Set up a Miele@home network with
other Wi-Fi enabled Miele appliances
38
– Activate
This setting is only visible if
Miele@home is deactivated. The WiFi
function is reactivated.
–
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the WiFi
function is switched off.
– Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the WiFi
reception quality, network name and
IP address.
–
Set up again
This setting is only visible if a WiFi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
– Reset
This setting is only visible if a WiFi
network has already been set up. The
WiFi function is deactivated and the
WiFi connection will be reset to the
factory default. You must set up a
new WiFi connection to be able to
use Miele@home.
The network settings should be reset
whenever a steam oven is being
disposed of or sold, or if a used
steam oven is being put into
operation. This is the only way to
ensure that all personal data has
been removed and the previous
owner will no longer be able to
access the steam oven.