Reading The Heart Rate - Technogym SKILLRUN Series Manual

READING THE HEART RATE

A receiver is incorporated into the control panel, which receives heart rate signals from the
telemetric chest band. Bluetooth Smart transmission technology is supported.
Should you have any doubts about the accuracy of the readings, contact the Technogym
Technical Support Service.
If you are experiencing difficulty in connecting the chest band:
- check that the battery of the band is fully charged;
- check that the chest band is not already connected to other devices.
Warnings
During a workout it is very important that your heart rate never goes above 90% of your maximum rate (unless you are an athlete engaged
in competitive sport).
The heart rate monitor is only designed to display your heart rate during exercise, and cannot be used for medical diagnostic purposes; the
band cannot be used to detect any cardiac dysfunction or abnormality. The heart rate shown on the display is purely indicative and cannot
be considered to be absolutely certain.
You are advised not to use a chest band with heart rate monitor if you have a cardiac support device such as a pacemaker or similar.
SKILLRUN
14