Program Commands - Cablescan 256/PC Instruction Manual

Page 44

PROGRAM COMMANDS

The following list contains commands related to loading, saving, and deleting wire list programs.
These are two-letter commands, which are executed by pressing the two letter keys followed
with an ENTER.
Function
Clear Memory
Delete Internal
Delete Cartridge
Learn Known Good
Load Internal
Load Cartridge
Save Internal
Save Cartridge
Clear Memory
Same as Clear Memory selected from the Menu modes. Pressing the letter Y when the prompt
"Are you sure?" is displayed will erase the program and User Labels in working memory. If you
decide not to clear memory, press the letter N.
Delete Internal
Delete Internal command is used to erase a wire list program from one of the storage locations in
the Internal RAM memory. When the DI command is typed followed by an ENTER, the
signature of one of the programs in memory is displayed. Pressing the letter D advances through
the list displaying the next program signature each time D is pressed. Pressing the letter U
displays the signature in the reverse order. When the signature of the program to delete is
displayed, press ENTER. The prompt "Are you sure?" is then displayed. Pressing the letter Y
will erase the program. If you decide not to erase the program, press the letter N.
Delete External
Delete External command is used to erase a wire list program from one of the storage locations
in the cartridge. When the DX command is typed followed by an ENTER, the signature of one
of the programs in the cartridge is displayed. Refer to the Delete Internal command above for
details.
Tester Command
CM Clear Memory
DI Delete Internal Program
DX Delete External Program
LG Learn Known Good
LI Load Internal Program
LX Load External Program
SI
Save Internal Program
SX Save External Program
Model 256/PC Instruction Manual
Command
Description