Cablescan 256/PC Instruction Manual page 13

Model 256/PC Instruction Manual
INTERNAL MEMORY
(RAM)
WORKING MEMORY
PROGRAM #1
PROGRAM #2
PROGRAM #8
• Create Test or Assembly program in Working Memory during "Learn" procedure.
(Program may also be downloaded through the RS-232C serial port into Working
Memory.)
• To store a newly created program for future use, copy it into one of the twenty-four
program locations using either SAVE INTERNAL or SAVE CARTRIDGE mode.
• All test and assembly procedures are conducted from the Working Memory. To use a
program that is stored in one of the twenty-four program locations, copy it into the
Working Memory using either LOAD INTERNAL or LOAD CARTRIDGE mode.
• All programs remain where recorded. SAVE and LOAD functions only copy them.
They are eliminated only by using the DELETE INTERNAL or DELETE CARTRIDGE
mode. The CLEAR MEMORY mode is used to erase the contents from the Working
Memory.
Programs with user labels occupy 4 memory locations.
Figure 3. Program Storage - Accommodations and Use
PROGRAM CARTRIDGE
PROGRAM #16
NOTE
EEPROM)
PROGRAM #1
PROGRAM #2
PROGRAM #3
PROGRAM #4
Page 5