Table of Contents
Advertisement
Model 256/PC Instruction Manual
Page 23
Reset
When Reset is selected, the Tester assumes a "wait" state, and it remains in that state until
another mode is selected. Reset also can be used to terminate a mode in operation.
Up/Down Arrows
The Up and Down arrows are used to select from the menu-selectable modes. Once a menu
selection has been made, the Menu Run key is pressed to initiate the mode selected. The display
shows each mode name arrived at during mode selection.
Menu Run
The Menu Run key executes the menu mode that is selected by the Up/Down arrows and shown
on the display. The Menu Run key is also used as an advance key for the menu modes.
Advertisement
Table of Contents
