Build Commands - Cablescan 256/PC Instruction Manual

Page 42

BUILD COMMANDS

The following commands relate to using the assembly features of the Model 256/PC. These
modes use Body Conductance to locate desired wires for assembly. At the system prompt, enter
the two-letter command, followed by an ENTER.
Function
Random Build
Sequential Build
Search
Random Build - RA
Same as RANDOM BUILD on the Front Panel. See section on Controls and Displays for more
details.
Sequential Build - SQ
Same as SEQ BUILD on Front Panel. See section on Controls and Displays for more details.
Execution of this command begins at the first sequence step programmed into the wire list table.
Search - SB
Same as SEARCH selected from the Front Panel menu. See section on Controls and Displays
for more details.
Tester 2-letter
Command
RA Random Assembly
SQ Sequential Assembly
SB Scan Body
Model 256/PC Instruction Manual
Command
Description