Build Commands - Cablescan 64 Instruction Manual

Model 64/64x2 Instruction Manual

BUILD COMMANDS

The following commands relate to using the assembly features of the Model 64.
commands used in conjunction with use body conductance to locate and identify desired wires
for assembly. At the system prompt, enter the two-letter command, followed by an ENTER.
Top Panel
Function
Random Build
Seq Build
Search (Menu)
Random Build - RA
Same as RANDOM BUILD on the Top Panel. See section on Controls and Displays for more
details.
Sequential Build - SQ
Same as SEQ BUILD on Top Panel. See section on Controls and Displays for more details.
Execution of this command begins at the first sequence step programmed into the wire list table.
Search - SB
Same as SEARCH selected from the Top Panel menu. See section on Controls and Displays for
more details.
2-letter Command Description
Command
RA
SQ
SB
Random Assembly
Sequential Assembly
Scan Body
Page 33
These