Table of Contents
Advertisement
Delayed Egress
Exit Device
Installation Instructions
4
ElectroLynx Connector System for All Electrical Installation
1. Mount exit device per instruction sheet provided.
2. Plug exit device connector into raceway connector in door and feed through 1" (25mm) hole in door.
Install rail mounting end clamp bracket with two (2) screws supplied. Install end cap.
3. Plug raceway connector from edge of door into electric hinge connector and feed feed wires back
through door prep. Mount electric hinge to door.
A. If wiring now, wire frame side wires to wires on pigtail harness on hinge as required by using
B. If wiring later, plug pigtail harness connector into electric hinge connector. Feed harness through
NOTE:
1. Wiring to pigtail harness is per facility wiring requirement.
2. For an ElectroLynx system, go to "function" or "monitor" page(s) with your device.
3. Combinations of certain monitors can be used in each device. These instructions detail installation
of each monitor separately.
ElectroLynx Connector System Notes:
System is designed to be installation friendly, with plug connectors from electric hinge through door
to device. The only wiring required is loose wires on pigtail harness assembly on frame side of electric
hinge (included with QC Hinge). Combinations of certain switches and monitors can be used.
The plug and receptacle connectors are designed to mate and lock together. Plug connectors into each
other with locking mechanism aligned. Do NOT force connectors together any other way.
For technical support contact Yale
at 800.438.1951 or support@yalelocks.com
®
Copyright © 2018, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
An ASSA ABLOY Group brand
connectors allowed by local code. Plug pigtail harness connector into electric hinge connector.
Feed harness through frame prep and mount electric hinge.
frame prep and mount electric hinge.
6
80-9470-0162-000 10/18
Hide quick links:
Advertisement
Table of Contents
