There Is No Room For The Cable When Installing In A Timber Door; Can I Leave A Usb Cable Connected To The Lock But Power It Via The Main Connector; I Have Old Led Furniture That I Would Like To Re-Use, Is There An Adaptor Kit; I Have An Old 3582El To Replace, Is This Lock Interchangeable - Assa Abloy Lockwood Selector Series Troubleshooting Manual

Table of Contents

Advertisement

There is no room for the cable when installing
in a timber door:
The cable boot is only intended for aluminum frame installs and can
be removed for timber door installations
Ensure door preparation is correct as the 3782EL requires a
lengthened mortice compared to a mechanical timber fix door
preparation.
Can I leave a USB cable connected to the lock
but power it via the main connector:
This is not recommended
I have old LED furniture that I would like to
re-use, is there an adaptor kit:
No, new and improved 4800 lens furniture will need to be
purchased.
I have an old 3582EL to replace, is this lock
interchangeable:
The lock is completely backwards compatible and a 9 – 12 pin
adaptor (SP3782EL-251) is available
• 2 wire PtO is not recommended
If using LED lens furniture, additional holes will be required above
the top furniture mounting hole
10
www.assaabloy.co.nz

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lockwood 3782el

Table of Contents