Option Components; Terminal Block Cn1 - YASKAWA SI-N3 Installation Manual

Devicenet ac drive option

Hide thumbs Also See for SI-N3:

Table of Contents

4 Option Components

• A Phillips screwdriver or slotted screwdriver (M3

• A flat-blade screwdriver (blade depth: 0.4 mm (0.02 in.), width: 2.5 mm (0.1 in.)).

• A pair of diagonal cutting pliers.

• A small file or medium-grit sandpaper.

Phillips screw sizes are different for different drive capacities. Prepare different

screwdrivers for different screw sizes.

Option Components

◆

Option

A - Connector (CN5)

B - Installation hole

C - LED (MS)

D - LED (NS)

Refer to

Option LED Display on page 13

Connect the included ground wire during installation. The ground wire is not necessary for installation on

GA700 and GA800 drives.

◆

The communication terminal is a pluggable terminal block that serves as the connection

point of the DeviceNet network communication cable to the option.

Figure 4.1 Option

for more information about the LEDs.

)

E - Ground terminal (FE) and

installation hole

F - Terminal block CN1

G - Option model number

YASKAWA TOEP C730600 84A DeviceNet Installation Manual

Table of Contents