Procedure B - YASKAWA SI-N3 Installation Manual

NOTICE
comply could cause erroneous operation.
A - Drive front cover
B - Keypad
Figure 5.6 Replace the Front Cover, Terminal Cover, and Keypad
7.
Set drive parameters in
performance.
■

Procedure B

This section shows the procedure to install and wire the option on a Z1000 drive.
Prepare the Drive for the Option
Correctly wire the drive as specified by the manual packaged with the drive. Make sure
that the drive functions correctly. Refer to the drive manuals for more information.
YASKAWA TOEP C730600 84A DeviceNet Installation Manual
Do not pinch cables between the front covers and the drive. Failure to
C - Drive terminal cover
Related Drive Parameters on page 44
5 Installation Procedure
for correct option
21