Procedure C - YASKAWA SI-N3 Installation Manual

A - Drive front cover
Figure 5.12 Replace the Front Cover and Keypad
7.
Set drive parameters in
performance.
■

Procedure C

This section shows the procedure to install and wire the option on a GA700 or GA800
drive.
Prepare the Drive for the Option
Before you install the option on a YASKAWA AC Drive GA700 or GA800, make sure
that the option software version is PRG: 1115 or later.
Correctly wire the drive as specified by the manual packaged with the drive. Make sure
that the drive functions correctly. For information about drive connection and wiring, refer
to the manuals for the drive on which you will use this option.
YASKAWA TOEP C730600 84A DeviceNet Installation Manual
B - Keypad
Related Drive Parameters on page 44
5 Installation Procedure
for correct option
27