Adding A Second Alert Profile In Your App - Dexcom G7 User Manual

Adding a second alert profile in your app

Profile Night
Name
GLUCOSE ALERTS
Urgent Low
3.1 mmol/L
Urgent Low Soon
Low
High
Rising Fast
Falling Fast
For example, if you want to sleep unless your glucose goes to 3.1 mmol/L, turn off all
alerts in your Night alert profile and make technical alerts vibrate. (The Urgent Low
alert will still sound.)
Note: Signal Loss alert settings stays the same in both profiles.
Profile Alerts
Show Quiet Modes
ALERT P RT ROFILES
Primary
Night
Scheduled to turn on:
Optimize Alerts
How to make alerts work for you
Reset Alert Settings
5 • Alerts | Dexcom G7 User Guide
Are there times or places when you want your alerts to
work differently? For example, you may not want to get
alerts at night unless your sensor reading goes too low.
You can create a second, separate alert profile to use when
Night
needed in Profile > Alerts > Add Second Alert Profile.
Display device screens lead you through naming the
Off
second profile, in this case, Night. Then, you can customize
Off
each alert in the Night profile to work as you want it to.
Off
Off
You can use the profiles two ways:
Off
Switch between them manually when you want
l
Set up a schedule for them to switch automatically
l
The app automatically renames your original alert profile as
Primary.
On
At the bottom of the second profile, you can set up a
Off
schedule for when it's used. The next scheduled time
Mon, 1:31
displays in Profile > Alerts.
You can also turn it on and off from Profile > Alerts.
59