Safety; Eu Conformity; Intended Use - Fluke VIBGUARD IIoT Installation And Operation Manual

2 Safety

VIBGUARD IIoT was designed and built following careful selection of the harmonized norms to be complied with as
well as other technical specifications. The system therefore corresponds to the state of the art and ensures the hig-
hest degree of safety.
Nevertheless, there are still risks relating to installation, commissioning and operation which are to be avoided.
Observe the general safety instructions in this section as well as the warnings in the instructions. Safety instructions
and warnings explain how you should act in order to protect yourself, others and objects from harm.

2.1 EU conformity

PRUFTECHNIK hereby declares that VIBGUARD IIoT conforms to the relevant European directives. The complete
text of the EU conformity declaration is available at the following Internet address:
:
https://www.pruftechnik.com/com/About-us/Company/Certificates-and-Material-Safety/

2.2 Intended use

VIBGUARD IIoT is a stationary condition monitoring system for monitoring the condition of machines mounted on
anti-friction bearings. The system records and processes the following signals and parameters:
Vibration parameters, broadband and narrow-band
l
Time signals
l
Spectra
l
Temperature
l
Process parameters
l
The system works continuously and records the machine signals synchronously on all channels
table for machines with dynamic operational behavior for which the operating and process parameters need to be
recorded simultaneously and at short intervals.
The system may only be operated within the specifications given in these instructions. PRUFTECHNIK shall not be lia-
ble for any damage caused by misuse.
1
maximum number of channels is type-specific
VIBGUARD IIoT
Installation and Operation
1
. It is therefore sui-
7