Information For The Operator - Fluke VIBGUARD IIoT Installation And Operation Manual

Installation and Operation

2.5 Information for the operator

Obligations of the operator
Maximum safety can only be achieved in practice if all measures required for this are adopted. As the operator, it is
part of your duty of care to plan these measures and monitor their implementation.
Ensure that the following requirements are met:
Qualified specialist personnel for installation, commissioning and operation is available.
Installation material and tools are provided.
Voltage supply and network connection are present in accordance with the specification.
Potential equalization is provided
Integration of the system into existing equipment
The safety of a plant in which the system is integrated is the responsibility of the installer of the plant.
CAUTION! Except for the mains power supply to the system, all other connected circuits must be SELV cir-
cuits.
Ensure that the following requirements are noted:
Use the system in accordance with the intended use.
Only operate the system in a technically flawless state.
Only use original accessories and original spare parts.
Observe all nationally applicable regulations, all safety, accident prevention and environmental protection
regulations as well as all recognized technical rules for safe and proper work.
Training
Provide ongoing training for operating personnel in relation to the application of all safety regulations in safety
instructions. Ensure that the following requirements are complied with:
The applicable legal and otherwise binding safety and accident prevention regulations as well as the general safety
instructions and warnings must be adhered to and followed.
Ensure that operating personnel work in a safety-conscious manner.
10 Edition: 03.2019