Table of Contents
Advertisement
HTCA-6400 User Manual
Installing Disk Drives
The system provides six externally accessible disk drive bays on the front panel. Notably, the system requires
3.5" SATA HDD/SSD. Please follow the steps below to install or replace disk drives.
The pictures below demonstrate the hard disk installation method of horizontally-mounted disk trays, which
is exactly the same as that of vertically mounted disk trays except for the orientation.
1. Select a drive bay for installation and hold the lock of the drive bay.
2. Open the lock outwards.
3. Pull the drive bay out and install a SATA disk drive. Please keep in mind that the SATA connector of your
SATA disk drive should point to the inside of the system.
32
Advertisement
Table of Contents
