Table of Contents
Advertisement
HTCA-6400 User Manual
Installing the PHM onto the Motherboard
1. Remove the dust cover from the socket
contacts of the motherboard.
Note: Inspect the surface of the socket
under sufficient light to ensure there is no
contamination or damage prior to the
PHM installation.
2. Flip the PHM over to align
carrier with the
Cutout
plate.
3. Flip the PHM back over, so the package
land of the processor will face the socket.
Lower the PHM vertically to engage it to
the alignment pins of the bolster plate.
PIN1
of the
of the bolster
1
Cutout
Alignment Pin
3
PHM
26
2
PHM
Alignment Pin
Advertisement
Table of Contents
