Installing The Disk Drives (Optional) - Lanner ECA-5540 User Manual

ECA-5540 User Manual

Installing the Disk Drives (Optional)

This system supports two 2.5" SATA SSD drive bays. Please follow the instructions to install the disk drives.
1. Power off the system. Locate the 2.5" disk bay on the front panel.
2. To remove the tray, push the tab for the tab
lever to slide open, and then hold the tab
lever to pull out the tray.
3. Slide one 2.5" SSD into the tray and make
sure the SSD contacts are facing outwards.
4. Then, turn the drive tray on the other side
(bottom side), and secure the SSD with two
(2) screws on each side.
Tab Lever
HDD/SSD Contacts
HDD/SSD Contacts
33
Tab