Accessing The Compute Blade(S) - Lanner HTCA-6400 User Manual

HTCA-6400 User Manual

Accessing the Compute Blade(s)

You have to access the compute blade(s) in order to install or replace CPUs, heatsinks, and DDR
memory DIMMs. Please follow the steps below to access the compute blades.
1. Select a compute blade you wish to access the internal components.
2. Rotate and loosen the captive screws circled in the image below. You may apply a screwdriver to conduct
this task.
3. Hold onto both captive screws and handles and lift them upwards at the same time.
4. Then, pull the compute blade out.
22