Installing Disk Drive(S) (Optional) - Lanner VP-501 User Manual

VP-501 User Manual

Installing Disk Drive(s) (Optional)

The HDD/SSD bay supports one 2.5" SATA HDD/SSD for additional data storage. Please follow the steps below
for installation.
1. Power off the system and open the chassis
cover.
2. Locate the disk tray placement inside the
system.
3. Loosen the three (3) screws that secures the
HDD/SSD tray and take the tray out.
4. Slide one 2.5" HDD/SSD into the tray, and
secure with four (4) screws on the rear side.
Make sure the SATA contacts are facing
outwards.
SATA Contacts
30