Osd Configuration - Defaults - Lindy CPU Switch Quad View Installation And Operation Manual

ON SCREEN DISPLAY
OSD - CONFIGURATION - DEFAULTS
DEFAULTS
Use arrow keys to navigate in the Configuration menu to the DEFAULTS line and press Enter / select to
open the Defaults window.
CONFIGURATION
BACKUP
RECALL
DEFAULTS
Note:
Executing the Defaults command resets
Quad View Switch completely and reboots.
All current user settings will be lost.
Before using Defaults command you should
save the current settings with Backup
command.
FACTORY DEFAULTS
SYSTEM HOTKEY
HOTMOUSE
QUAD MODE
OSD POSITION
OSD LANGUAGE
SECURITY
MODE PIP
START
CONSOLE VIDEO OUTPUT
KEYBOARD
MULTI MONITOR
VIDEO VIDEO INPUT
BRIGHTNESS
CONTRAST
HORIZ POSITION
VERT POSITION
SCREEN WIDTH
PHASE
FORMAT
COMPUTER MOUSE
34
Quad View Switch - Installation and Operation Manual
CONFIGURATION / DEFAULTS
Do you want to set the default factory
settings ?
This will override all user settings and
will restart the device
Press Enter / Select to set the default
settings.
Press any other key to keep the user
settings.
= Multiple Hotkey / Hotkey = Strg + Alt
= On / Hotmouse timeout = 5 sec.
Channel select timeout = 5 sec.
= centered
= English
= none (security level = 0)
Size = 15 % ;
Display mode = triple;
Offset from top = 0 %;
Start setting = Quad / active channel = 1
= auto
= English
Monitor 1 Channel 1;
Monitor 3 Channel 3;
= DVI / VGA (all channels)
= 58,2 % (all analog channels)
= 63,5 % (all analog channels)
= auto (all channels)
= auto (all channels)
= +0 (all analog channels)
= +0 (all analog channels)
= No (all channels)
USB mouse positioning = relative (all channels)
Zoom factor = 1;
Active channel = gap;
Monitor 2 Channel 2;
Monitor 4 Channel 4