Osd Mode - Start - Lindy CPU Switch Quad View Installation And Operation Manual

ON SCREEN DISPLAY
OSD - MODE - START
START (Set start configuration)
Use arrow keys to navigate in MODE menu to the START line and press Enter / select to open the Start
window.
MODE
PIP
START
This feature allows you to configure the start
configuration (display mode, active channel
and PiP settings) when you reset or power up
the device.
The actual Start configuration is dispayed by
entering the Start menu. After modifying
parameters in channel, mode and PiP setting
fields, press ESC key in order to save new
Start configuration.
Use function „Use current mode" in order to
adopt the actual settings as Start mode.
Navigate to „Use current mode" line and
confirm with Enter.
If you do not use this feature, screen
comes up in Quad Mode.
Default Start screen
32
Quad View Switch - Installation and Operation Manual
MODE / START
channel: 1
mode: Quad
PiP Settings
Use current mode
START / PIP
PIP display mode:
Active channel:
PIP size:
PIP zoom factor:
Offset from top:
Example of a Start screen
2 3 4
Voll PiP
triple
gap
20 %
1
0 %
1
3
4