Osd System - Disable Channel - Lindy CPU Switch Quad View Installation And Operation Manual

ON SCREEN DISPLAY
OSD - SYSTEM - DISABLE CHANNEL
DISABLE CHANNEL
Use arrow keys to navigate in SYSTEM menu to the DISABLE CHANNEL line and press Enter / select to
open the Disable Channel window.
SYSTEM
HOTKEY
HOTMOUSE
QUAD MODE
OSD POSITION
OSD LANGUAGE
SECURITY
TEST PATTERN
DISABLE CHANNEL
If only two or three computers or video sources are connected to Quad View Switch the „Disable Channel"
function allows you to set the number of channels to this value (2 or 3), this means:
- message „no signal input x" is not shown in Quad Mode,
- PiP images of unconnected channels are not displayed on screen and
- in Fullscreen Mode these channels are not selectable.
If you have connected three computers (channel 1 to 3) to Quad View Switch, navigate with arrow keys to the
number 3 field (see Disable Channel window) and press Enter / Select.
Note:
Using this feature, computers / video sources must be connected to Quad View Switch
in ascending order from channel 1 to 4.
28
Quad View Switch - Installation and Operation Manual
SYSTEM / DISABLE CHANNEL
Choose number of channels:
1
2
3
4
Move to value with
Enter / Select to choose
Disable Channel window