Additional Button Functions - Lindy CPU Switch Quad View Installation And Operation Manual

INTRODUCTION
HARDWARE

Additional button functions

VGA output resolution
To set output resolution to 640 x 480 pixel @ 60 Hz press buttons 1 and 2 for longer than 1 second.
It is recommended to use this feature, if you can't see video on console's screen due an incorrect setting of
the output resolution. After configuration to this basic settings use OSD in order to set a valid video format
(resolution + rate) for the connected monitor.
VGA Resolution
640 x 480 px
Hardware Reset
Press buttons 3 and 4 simultaneously for longer than 4 seconds in order to reset the unit completely (video +
mouse + keyboard) - see also page 5: Reset.
Hardware
Reset
Entry OSD
Press buttons Quad and PiP simultaneously for longer than 1 second in order to display the OSD menu .
4
Quad View Switch - Installation and Operation Manual
Note:
By switching power off and on, the device resets only the
video circuit due to the „keep alive" function of keyboard
and mouse.
OSD
menu