INTRODUCTION
HARDWARE
REAR PANEL
Reset
RS232
KVM (Keyboard/Video/Mouse)
USB-A ports are used for connecting keyboard and mouse, Using a USB Hub you can connect a couple of
keyboards and mice. They will work in share mode with an inactivity timeout of 3 seconds.
DVI-I port is used for VGA/DVI monitor connection.
COMPUTER 1 – 4
For keyboard and mouse connection between Quad View Switch and computer use either PS/2 plus Y or
USB cables.
Using a USB-Hub, you can connect couples of keyboards or mice to Quad View Switch's USB
connector. They will work in share mode with an inactivity timeout of 3 seconds.
REMOTE OPERATION
If necessary (depending on distance, quality, infrastructure etc.) you can use LINDY's KVM - Extender on
KVM port in order to work remotely over CAT5, fiber optic or ethernet .
6
Quad View Switch - Installation and Operation Manual
4
DVI-I
DVI-I
USB-A
KVM (Console)
DVI-I USB-A USB-A
DVI-I PS/2 (Multi) USB-B
3
2
DVI-I
DVI-I
PS/2
USB-B
COMPUTER 1 - 4
1
DVI-I
Need help?
Do you have a question about the CPU Switch Quad View and is the answer not in the manual?