Radar Overlay; Dual Radar - Simrad GO XSE Series Operator's Manual

108
* Optional radar symbology. Radar symbology can be turned
ON/OFF collectively from the radar menu, or individually as
described in the radar settings dialog.
** The quick access buttons are accessed by touch operation.

Radar overlay

You can overlay the Radar image on the Chart. This can help you to
easily interpret the radar image by correlating the radar targets with
charted objects.
Ú Note:
A heading sensor must be present in the system for radar
overlay.
When the radar overlay is selected, basic radar operational functions
are available from the Chart panel's menu.
Selecting radar overlay source on chart panels
To select the radar source of the radar overlay displayed on the
chart panel, use the Radar options and then Source chart panel
menu options to select the radar source.
For chart pages with more than one chart with radar overlay, it is
possible to set up different radars sources for each chart panel.
Activate one of the chart panels and then select one of the available
radars in the radar source menu option. Repeat the process for the
second chart panel with radar overlay, and select an alternative
radar for this panel.

Dual radar

You can use a dual panel page to show radar images from two
different radar sources.
Ú Note:
Interference will be seen on the Broadband Radar on
most ranges when a pulse or Halo radar, and a Broadband radar
are transmitting at the same time on the same vessel. We
recommend to only transmit on one radar at a time. For
example, transmit Broadband radar for typical navigational
usage, or pulse or Halo radar to locate weather cells, defined
coastlines at a distance and to trigger Racons.
Radar | GO XSE/XSR Operator Manual