Setting Up The Audio System; Selecting Audio Source; Using An Am/Fm Radio - Simrad GO XSE Series Operator's Manual

Setting up the audio system

Audio server
If multiple audio sources are connected to the same network, one of
the devices must be selected as the audio server. If only one device
is present, it is the selected audio server by default.
Setting up the speakers
Ú Note:
The number of mixer options depends on active audio
server.
Speaker zones
This device can be set up to control different audio zones. The
number of zones depends on the audio server connected to your
system.
You can adjust balance, volume and volume limit settings
individually for each zone. Adjustments to the bass and tremble
settings will alter all zones.
Master volume control
By default, the volume for all speaker zones are adjusted when you
adjust the volume.
You can adjust each speaker zone individually. You can also define
which zones that shall be altered when you adjust the volume.

Selecting audio source

Use the source button to display the list of audio source. The
number of sources depends on the active audio server.
Bluetooth devices
If your audio server supports Bluetooth, Bluetooth will be listed as a
source.
Use the Bluetooth icon in the audio controller to pair the audio
server with a Bluetooth enabled device such as a smart phone or
tablet.

Using an AM/FM radio

183
Audio | GO XSE/XSR Operator Manual