Simrad GO XSE Series Operator's Manual page 103

change is acceptable. If the turn is not accepted, the vessel will
continue with the current set heading.
The course change limit setting depends on the autopilot
computer. Refer to the autopilot computer documentation.
Turn patterns
The system includes a number of turn patterns, available when the
autopilot is in auto mode. The number of turn patterns depend on
autopilot computer.
Ú Note:
Turn patterns are not available if the boat type is set to
sail.
To start a turn
• Select the port or starboard button
Turn variables
All turn patterns, except the U-turn, have settings that you can
adjust before you start a turn, or at any time when the boat is in a
turn.
U-turn
Changes the current set heading by 180°. When activated, the
autopilot is switched to Auto mode.
The turn rate is identical to Turn rate setting.
C-turn
Steers the vessel in a circle.
Outboard autopilot | GO XSE/XSR Operator Manual
103