Simrad GO XSE Series Operator's Manual page 24

24
• pressing the power key
• selecting the system controls button on the home page
• swiping down from the top of the screen on application pages
Activating functions
Select the button of the function you want to open, set or toggle on
or off. For those functions that toggle on and off, a highlighted
button indicates the function is activated.
Standby mode
In Standby mode, the backlight for screen and keys are turned off to
save power. The system continues to run in the background.
You select Standby mode from the System Controls dialog.
Switch from Standby mode to normal operation by a short press on
the Power key.
Display illumination
Brightness
You can cycle the preset backlight levels by short presses on the
Power key.
The display backlighting can also be adjusted from the System
Controls dialog.
Night mode
The night mode can be activated from the System Controls dialog.
The night mode option optimizes the color palette for low light
conditions.
Basic operation | GO XSE/XSR Operator Manual