Simrad GO XSE Series Operator's Manual page 54

54
• Select the new waypoint option in the menu
Moving a waypoint
A waypoint can be moved from the position if active and if the
waypoint is selected in the menu.
To move a waypoint to a new position, select the move waypoint
menu option and then select the new waypoint location on the
image.
To save the waypoint at the new position, select the finish moving
menu option
Edit a waypoint
You can edit all information about a waypoint from the edit
waypoint dialog.
The dialog is activated by selecting the waypoint, and then
selecting edit from the menu.
The dialog can also be accessed from the waypoints tool on the
home page.
Deleting waypoints
You can delete a waypoint by selecting the delete menu option
when the waypoint is activated on the panel.
You can also delete a waypoint by selecting it in the routes dialog
and then deleting it in the edit waypoint dialog.
You can delete all waypoints or waypoints by symbols from the
system using the waypoints dialog.
You can delete MOB waypoints the same way.
You can back-up your waypoints, routes and tracks before deleting
them, refer to "Maintenance" on page 220.
Waypoints, routes, and tracks
Manual
| GO XSE/XSR Operator