Introduction - Kohler 500EOZCS Operation

This manual provides operation instructions for
350/500EOZCS and 300/450EFOZCS Scania-powered
marine model generator sets equipped with the
following controller:
Decision-Makerr 3500
D
Refer to the engine operation manual for generator set
engine scheduled maintenance information.
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipment service requirements are very important
to safe and efficient operation. Inspect the parts often
and perform required service at the prescribed intervals.
Obtain service from an authorized service distributor/
dealer to keep equipment in top condition.
TP-7126 5/20
Abbreviations
This publication makes use of numerous abbreviations.
Typically, the word(s) are spelled out along with the
abbreviation in parentheses when shown for the first
time in a section. Appendix A, Abbreviations, also
includes many abbreviation definitions.
Before installing a marine generator set, obtain the
most current installation manual from your local
distributor/dealer. Only qualified persons should
install the generator set.
Software
Kohler distributors can download the latest software
from the Kohler Power Resource Center website
including the following topics:
Software used by generator set controllers including
D
updates and documentation references.
Network Communications provides basics to
D
terms, protocols, standards, wiring, configurations,
and model.
Engine Electronic Control Module (ECM) has
D
information about electronic devices provided by the
engine manufacturer to manage engine data.

Introduction

Introduction 9