Switches And Controls - Kohler 500EOZCS Operation

1.5.1

Switches and Controls

Note: US/Metric Display
Section 1.8—Controller Configuration Menu.
Alarm Horn. The alarm horn alerts the operator or other
attendants that a warning or shutdown condition exists.
Alarm (Horn) Silence.
silences the alarm horn at the operator's discretion.
Note: Additional alarm silencing options are shown in
Section 1.8—Controller Configuration Menu.
Restore alarm horn switches at all locations including
those on remote annunciator kits after correcting the
fault shutdown to avoid reactivating the alarm horn. See
Section 2—Operation, 2.6.6 Controller Resetting for
resetting the controller.
Emergency Stop. The operator-activated pushbutton
immediately shuts down the generator set in emergency
situations. Reset the emergency stop switch after
shutdown by pulling the emergency stop switch
outward. Use the emergency stop switch for emergency
shutdowns only. Use the master control switch
OFF/RESET button for normal shutdowns.
Generator Set
(OFF/RESET- AUTO- RUN). These buttons reset the
controller fault lamps and start/stop the generator set.
Additional information is shown in Section 2—
Operation.
Lamp Test. Press and hold the Alarm Silence/Lamp
Test button to test the controller indicator lamps, alarm
horn, and digital display.
TP-7126 5/20
is selectable
The alarm silence switch
Master Control
Pushbutton/Rotary Selector Dial.
provides access to the menus for monitoring. Press the
in
selector dial to activate the graphical display and to
select choices shown on the display. Rotate the dial to
navigate through the menus.
The pushbutton/rotary selector dial has several features
and functions:
Momentarily press the dial to activate the graphical
D
display if dark.
Rotate the dial to navigate through the main
D
menus—turn counterclockwise to go forward (down)
and clockwise to go back (up). The menus wrap to the
beginning.
Press the dial at a given main menu to access the
D
submenus within the selected main menu.
When in the submenu, rotate the dial to navigate
D
through the submenu—counterclockwise to go
forward (down) and clockwise to go back (up). The
menus wrap to the beginning.
Momentarily press the dial when in the submenu to
D
make a user selection choice (if available) or to go
back to the respective main menu.
To return to the previous menu, rotate the dial
D
(counterclockwise or clockwise) until the back arrow
appears in the upper left corner and press the dial.
GENERATOR METER
L1-L2 VOLTS
L2-L3 VOLTS
L3-L1 VOLTS
AVG GEN VOLTAGE L-L
GEN FREQUENCY
1
GENERATOR METER
L1-L2 VOLTS
L2-L3 VOLTS
L3-L1 VOLTS
AVG GEN VOLTAGE L-L
GEN FREQUENCY
1. Back arrow
Figure 1-6 Back Arrow Location
After about 5 minutes of no user input (pushbutton/
D
rotary selector dial or buttons), the menu resets to the
top of the main menus and auto-paging activates for
the Overview submenus.
This control
01:46 PM
11/07/13
###.#V
###.#V
###.#V
####V
##.#Hz
01:46 PM
11/07/13
###.#V
###.#V
###.#V
####V
##.#Hz
Section 1 Specifications 19