Overview Submenu; Paralleling Metering Submenu; Generator Information Menu; Generator Information Submenu - Kohler 500EOZCS Operation

1.6.3

Overview Submenu

Generator Status:
Average Volts Line-to-Line.
D
configurations the average line-to-line voltage of
L1, L2, and L3 is displayed.
configurations show the L1-L2 voltage.
Average Current value displays as the average for
D
three-phase configurations or the current value for
L1-L2 with single-phase configurations.
Frequency (Hz) value displays for the output AC
D
voltage.
Engine Status:
Coolant Temperature displays the engine coolant
D
temperature.
Oil Pressure displays the engine oil pressure.
D
Battery Voltage displays the DC voltage of the
D
engine starting battery(ies).
System Status:
Fuel Pressure displays fuel injection pressure.
D
Total Power displays the generator operating
D
power rating in kW.
Engine Run Time displays the total run time hours.
D
1.6.4

Paralleling Metering Submenu

Note: The paralleling metering is only valid if the
Decision-Makerr 3500 controller is controlling a
motor-operated circuit breaker.
Connected to Bus displays if the generator is
D
connected to the paralleling bus (the output
breaker or contactor is closed).
Avg Bus Voltage L-L displays the average of the
D
three-phase line-to-line voltage measured by the
paralleling bus sensing.
Avg Gen Voltage L-L displays the average of the
D
three-phase line-to-line voltage of the generator
output.
Bus Frequency displays the cycle frequency of
D
the paralleling bus.
Gen Frequency displays the cycle frequency of
D
the generator.
22 Section 1 Specifications
For three-phase
Single-phase

1.7 Generator Information Menu

1.7.1
Bus Total Power displays the real power provided
D
by all the generators in the paralleling system.
Bus % of Rated kW displays the ratio between the
D
Bus Total Power and the Bus Total Capacity (found
in the Generator Management screen) expressed
as a percentage.
Bus % of Rated kVAR displays the ratio between
D
the reactive load on all generators in the paralleling
system and the bus reactive capacity (the sum of
3/4 of the rated kW of all connected generators)
expressed as a percentage.

Generator Information Submenu

Total Run Time displays the total run time hours.
D
Hours Loaded displays the total loaded hours.
D
Hours Unloaded displays the total unloaded
D
hours.
kW Hours displays the total kW hours.
D
Operating Hours displays the total operating
D
hours.
Total Number of Starts displays the total number
D
of times that the engine was started via the
generator set controller.
Last Maintenance displays the date on the
D
controller system clock when the last maintenance
was performed.
Operating Hours Since Maintenance displays
D
the total number of hours of operation since the last
maintenance date.
Starts Since Maintenance displays the total
D
number of generator set startup events since the
last maintenance date.
Engine Hours Since Maintenance displays the
D
total engine hours since last maintenance.
Loaded Since Maintenance displays the total
D
loaded hours since last maintenance.
Unloaded Since Maintenance displays the
D
unloaded hours since last maintenance.
kW Hours Since Maintenance displays the total
D
kW hours since last maintenance.
TP-7126 5/20