Introduction - Kohler 48RCLC Installation Manual

Introduction

This manual provides installation instructions for Model 48RCLC and 60RCLB reduced-setback generator sets equipped with
the Kohler 6.2L engine and the RDC2 controller. Operation manuals are available separately. See Figure 1 for an illustration of
a typical Kohler generator set equipped with the Kohler 6.2L engine.
Kohler strongly recommends that only factory authorized dealers install and service the generator.
Information in this publication represents data available at the time of print. Kohler Co. reserves the right to change this
publication and the products represented without notice and without any obligation or liability whatsoever. Only trained and
qualified personnel should install or service the generator set.
Read this manual and carefully follow all procedures and safety precautions to ensure proper equipment operation and to avoid
bodily injury. Read and follow the Safety Precautions and Instructions section at the beginning of this manual. Keep this manual
with the equipment for future reference.
Figure 1 Kohler 6.2L Engine-powered Generator Set
Warranty Registration and Controller Unlock Code
The RDC2 controller requires an unlock code to operate in automatic (AUTO) mode. The unlock code needs to be entered only
once, at or before the time of installation. See TP-7238 for instructions to register the generator set, obtain the unlock code, and
enter it into the RDC2 controller, if necessary.
TP-7203 4/23 11