Networking Status Submenu - Kohler 6VSG Operation Manual

3.16.1 Networking Status Submenu

The Networking Status submenu contains settings for OnCue
Manual for information about the appropriate network settings. Changes to these settings are not typically required.
If DHCP is enabled, IP parameters are not displayed. If DHCP is disabled (i.e., if a static IP address is used), the IP parameters
are displayed.
To enable or disable DHCP and change the IP settings, go to the Networking Configuration menu. See the Networking
Configuration Submenu (OnCue
Networking- -->
Information
Figure 33 Network Status Submenu
TP-6843 12/21
®
Password) section.
Networking- -->
Status
®
Plus. See Figure 33. See the OnCue
OnCue Status:
Connected
DHCP:
Enabled
IP Address:
123.456.789.123
Subnet Mask:
123.456.789.123
Gateway:
123.456.789.123
DNS 1:
123.456.789.123
DNS 2:
123.456.789.123
Ethernet Status:
Disconnected
OnCue Server:
123.456.789.123
<--- Return
®
Plus Software Operation
47