Memory Names; Memory Clearing - Icom IC-756 Instruction Manual

5
MEMORY OPERATION

Memory names

All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Letters (capitals), numerals, some symbols ( ⁄ , ?, M)
and spaces can be used.
• Editing (programming) memory names
q If the start up screen is not selected (if [F-5]'s func-
tion is [EXIT]), push [F-5] one or more times to exit.
w Push [
MEMORY] to select the memory chan-
(F-3)
nel screen.
e Select the desired desired memory channel.

Memory clearing

Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select memory mode with [VFO/MEMO].
w Select the desired memory channel with [Y]/[Z].
e Push [M-CL] for 2 sec. to clear the contents.
- The programmed frequency and operating mode dis-
appear.
r To clear other memory channels, repeat steps w
and e.
45
14.195.00
14.205.00 14.205.00
r Push [
NAME] to edit memory channel name.
(F-4)
- A cursor appears and blinks.
- Memory channel names of blank channels cannot be
edited.
14.195.00
Character
14.205.00 14.205.00
keys
t Input the desired character by pushing the charac-
ter keys (as shown above) one or more times or by
pushing the band key for number input.
- Push [ Ω] or [ ≈] for cursor movement.
(F-1) (F-2)
- Push [ DEL] to delete the selected character.
(F-3)
- Push [ SPACE] to input a space.
(F-4)
y Push [
EXIT] to input the set the name.
(F-5)
- The cursor disappears.
u Repeat steps e to y to program another memory
channel's name, if desired.
i Push [
EXIT] to exit the memory channel
(F-5)
screen.
24.960.00
M-CL Beep
24.960.
Beep
Push for 2 sec.
Beep