Memory Operation; Memory Channels; Memory Channel Selection - Icom IC-756 Instruction Manual

5

MEMORY OPERATION

Memory channels

The transceiver has 101 memory channels. The mem-
ory mode is very useful for quickly changing to often-
used frequencies.
MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels

Memory channel selection

• Using the [Y Y ]/[Z Z ] keys
q Push [VFO/MEMO] to select memory mode.
w Push [Y]/[Z] several times to select the desired
memory channel.
- Push and hold [Y]/[Z] for continuous selection.
- [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [VFO/MEMO] again.
VFO/
MEMO
41
MEMORY
CHANNEL
NUMBER
One frequency and one mode in
1–99
each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scan.
14.195.00
14.100.00
or
24.960.00
All 101 memory channels are tunable which means the
programmed frequency can be tuned temporarily with
the tuning dial, etc. in memory mode.
TRANSFER
CAPABILITY
• Using the keypad
q Push [F-INP].
w Push the desired memory channel number using
the keypad.
- Enter 100 or 101 to select scan edge channel P1 or
P2, respectively.
e Push [Y] or [Z] to select the desired memory
channel.
OVER-
TO VFO WRITING
Yes Yes
Yes Yes
14.100.00
then
F-INP
1 2
ENT
14.100.12
or
24.960.00
CLEAR
Yes
No
F-in
P