Table of Contents
Advertisement
HODEDAH
Step 5
D
C
L2
BOTTOM VIEW
BOTTOM VIEW
1. At bottom view position, place 2x panel (15) next to each side of panel (14 & 16).
Then tighten 4x Screws (D) from each side of 2x panel (15) with screwdriver.
2. Take panel (17) and using Nails (G) slightly hammer it into the edges, through
panel (17) onto panel (14 # Drawer front) and (16 # Drawer back).
3. Then place Drawer Slide (L2) onto the edges of panels (15) both sides and screw in
three Letter (D) Screws onto each hole of the drawer slide connecting it to panels (15)
with screwdriver. (As Shown).
4. Flip drawer around and attach Handle (F1) to front panel (14) by using 2x Screws (E)
from the inner side panel (11) with screwdriver.
www.Hodedah.com
CB SCREW M4X38MM
CB SCREW M3.5X16MM
DRAWER SLIDE 14"
10
G
6
F1
2
NAIL 5/8
MOON HANDLE (PVC)
BOTTOM VIEW
COMPLETED
8
1
12 | Page
Advertisement
Table of Contents
